No firsthand experience with Redbacks, sorry to say.
MPS = MPOA (Multiprotocol Over ATM)
MPLS = MultiProtocol Label Switching; it's a relatively new standard (i.e. not specific to any vendor) that "paints" frames with an additional header. This speeds up switching because the switch doesn't have to disassemble the IP packet to find the layer two information.
-----Original Message-----
From: Jae Kang [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 7:33 PM
To: '[EMAIL PROTECTED]'
Subject: OT: anyone has Redback experience?
Hi all,
Does anyone have a good experience with Redback products?
Also I think I have a good knowledge about the follwoing two term.
MLS (Multilayer Switching - layer 3 switching term ) and
MPS(Multiple layer server - ATM term.)
But, what about MPLS(?) Is this redback-specific?
Regards,
_________________________________________
Jae-Joon Kang - Senior Network Integration Engineer.
Ipex Information Technology Group
Ph: (07) 3406 5887 Fax: (07) 3406 5859
Mobile: 0410 556 107 E-mail: [EMAIL PROTECTED]
Address: 88 Commercial Rd Newstead, Brisbane,
Queensland, Australia
_________________________________________
------------------------------------------------------------
This e-mail may be confidential. Any opinions expressed herein are the
opinion of the writer unless there is an express indication to the contrary.
If you are not the intended recipient of this communication please delete
and destroy all copies and immediately reply by return e-mail. Ipex ITG
disclaims all liability and responsibility for any direct or indirect loss
arising from this e-mail and/or any attachments.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
