Yes. And, in fact, I once discovered that with modem POTS lines, I had to use a
dialer interface.
If I just used an asynchronous interface, the routers would dump all the routes on
disconnection. I would not expect this to be the case with a BRI interface however.
>>> "Hubert Pun" <[EMAIL PROTECTED]> 10/06/00 05:32PM >>>
Can snapshot routing be done on dialer profile instead of the BRI
physical interface?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]