Only work at distance vector routing protocol, such as RIP, IGRP, RIP for
IPX, etc.
For link state routing prootocol like OSPF, IS-IS, constant exchange hello
packet,
snapshot routing will not work in such environmnet.
For EIGRP, this particular routing protocol using hello protocol ecchange
with neighbor,
the ISDN link will keep up when hello packet are exchange with neighbor
router,
therefore, snapshot will not work in your scenario.
Or you may use passive-interface command with static route will be suitable
for your scenario, I guess
""Mr. Oletu Hosea Godswill, CCNA"" <[EMAIL PROTECTED]> ?????
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Sorry, Snapshot routing is purely for Distant vector
> routng protocols, so eigrp is out of it. Static routes
> will solve your problem.
>
> Thanks
> Oletu H. G.
>
> >Guys,
> >
> >I know that snapshot routing support RIP and IGRP
> >but .does EIGRP
> >support
> >snapshot routing?
>
> >I had configure EIGRP and snapshot. But seems
> >snapshot routing got no
> >effect on EIGRP. When the snapshot is in quiet
> >status, eigrp
> >continuous
> >keeping the ISDN link up.
> >
> >If snapshot does not works on EIGRP then is it only
> >static route can be
> >used
> >to keep ISDN link quiet?
> >
> >Regards
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/?.refer=text
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
