it's a receive-only dish
the customer has a terrestrial link for the return path
Jason
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jay Hennigan
Sent: Tuesday, October 10, 2000 11:34 AM
To: [EMAIL PROTECTED]
Subject: Re: keepalive set in frame-relay circuit?
On 9 Oct 2000 22:50:50 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote:
:this interface is connected to a comstream modem (satellite modem) then out
:as a satellite link to frame-relay switch
Check with Comstream. Do they specify frame-relay encapsulation?
When you say "modem", is it a regular RS-232 modem? Is the satellite
two-way to you? Is it a VSAT and you're transmitting to the bird, or
is it a receive-only dish and you're using dial-up for the return path?
Is it an asynchronous modem?
Have you tried "encapsulation frame-relay IETF" on the interface?
It sounds as if you really need to get some specifics from the satellite
carrier as to exactly what interface configuration they expect.
:On 9 Oct 2000 20:58:12 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote:
::if that is the case setting keepalives to what value is optimal?
::
::10 , I tried setting it to 10 but it went down
:
:To what, if anything, is this interface physically connected?
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
