This is not a direct answer to your question, but I recently upgraded a couple of 2500s from 11.1 to 12.0 and in the process I was asked if I wanted to erase the flash. I think the procedure will ask this if you try to copy tftp flash an image that will not fit into the free space on the flash. Maybe you are trying to do something similar... daveh -----Original Message----- From: Rossetti, Stan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 10, 2000 11:47 AM To: '[EMAIL PROTECTED]' Subject: How do you erase the flash on 2505 router. I have used the "del flash:xxxxxxxx" and erase flash:xxxxxxx" commands, but I keep getting the following error %Error deleting flash:/igs-d-l.103-17.bin (Device is read-only). The files are rw. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 <<...>> **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
