It is entirely up to you as to what group number you choose. Logic tends to
say you should use the same numbers so that fault finding and general logic
is easy to follow. But at the end of the day you could have group number 1
within vlan 12 if you wished.
Hope this helps.
-----Original Message-----
From: Zhang Jin [mailto:[EMAIL PROTECTED]]
Sent: 11 October 2000 06:16
To: [EMAIL PROTECTED]
Subject: HSRP question --help
Dear group,
tomorrow I will take the BCSMN exam.Only 1 question confused me,that
is:
in RSM module,when I configure HSRP as follows:
interface vlan vlannumber
ip address ipaddress subnet_mask
standby groupid preempt
standby ip ipaddress
question is whether should I make the vannumber=groupid?
Please reply me ASAP.
thank you!
dean
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
