Yes, The 2nd line will drop automatically.... dialer load-threshold Usage Guidelines This command applies to dialer rotary groups only. ""When the cumulative load of all UP links(a number n) exceeds the load threshold the dialer adds an extra link and when the cumulative load of all UP links minus one (n - 1) is at or below load threshold then the dialer can bring down that one link"". The dialer will make additional calls or drop links as necessary but will never interrupt an existing call to another destination. Faisal Athar B.E,MCSE,CCNA,CCNP [EMAIL PROTECTED] wrote: Hi, Can anyone tell me if the second B-channel goes down after the traffic gets less than the <load> in the dialer load-threshold <load> command. If not is there any command to bring the second B-channel down automaticaly when there is less traffic. Thanks, Tarry -- Sent through GMX FreeMail - http://www.gmx.net _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
