I've aquired a cisco 633 SDSL CSU/DSU and I'm attempting to make it work with an existing Phoenix Networks (NorthPoint) SDSL connection that is terminated at the CP with a 3Com SDSL bridge. The 3Com device has an SDSL interface and an ethernet interface and it acts as a transparent bridge. There's no configuration necessary. I'm trying to make the cisco 633 work with this link so that I can pass off the SDSL WAN link to a 1750 via a sync serial link, but I can't seem to make it work. I have no VCI information to configure on the 633, as there was no config necessary on the 3Com device. Any ideas on how to configure this 633 as an SDSL to serial bridge or as a simple DSU? Ben -- Ben Hockenhull [EMAIL PROTECTED] "Revenge is a dish best served with pinto beans and muffins." _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
