Trying do a frame-relay map statement that maps dlci
no to the ip address of the interface you are trying
to ping
suaveguru
--- "Claussen, Ken" <[EMAIL PROTECTED]>
wrote:
> I am trying to setup a Frame Relay link in a lab
> situation. We have Layer 2
> speaking LMI back and forth and the line Protocol is
> reported as Up on the
> serial interface. We assigned it a Private address
> and created a static
> route pointing at the serial interface of the other
> router. When you do a
> Show ip route it reports that all the routes exist
> as I believe they should
> (See config to follow) The Problem is we can't ping
> the IP address of the
> local serial interface 192.168.4.1, and I can't seem
> to figure out why. I
> beleive if I could ping the local serial interface
> then traffic would pass
> from our development network to our test network on
> 192.168.3.1. Please
> review my config on the 2610 and help me figure out
> why I can't ping the
> local interface before I use this router as a
> frisbee (which would be a
> shame considering it is a 2610)
> Begin Config
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname cisco2600
> !
> enable password cisco
> !
> ip subnet-zero
> !
> !
> !
> !
> !
> interface Ethernet0/0
> ip address 192.168.1.3 255.255.255.0
> no ip directed-broadcast
> !
> interface Serial0/0
> ip address 192.168.4.1 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no ip mroute-cache
> frame-relay interface-dlci 101
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 192.168.1.1
> ip route 192.168.3.0 255.255.255.0 192.168.4.2
> no ip http server
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> snmp-server engineID local 000000090200003094104240
> snmp-server community public RO
> !
> line con 0
> exec-timeout 0 0
> password cisco
> transport input none
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> no scheduler allocate
> end
> cisco2600#
> End Config
> Please help to save my sanity! all responses are
> greatly appreciated!
>
>
> Ken Claussen MCSE CCNA CCA
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
