This is probably an indication of PPP authentication problems. Turn on
"debug ppp auth" and take a look when you are dialing.
Regards,
Eric Sineath, CCIE #4504
Senior Consultant
SBC DataComm
-----Original Message-----
From: Hans Schimek [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 19, 2000 4:14 PM
To: [EMAIL PROTECTED]
Subject: ISDN calls gets connected but disconnects immediately
hi!
i am simulating an isdn call on an isdn switch with 2 S0 interfaces.
i am trying to configure DDR . as i am trying to ping the remote
router ( 192.168.0.1 ) the call gets initiated but gets disconnected
immediately.
i included the output of the isdn q931 command and my running config.
any advice ?
thanx in advance
=============================
Hans Schimek
Student
Fachhochschule St. P�lten f.
Telekommunikation und Medien
mailto: [EMAIL PROTECTED]
gsm : +43 699 10605315
fax : +43 3613 2311 4
icq : 22308773
www : www.schimek.net
=============================
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
