only if you have auto sense on. I would however say as you should to auto
sense GOODBYE. Set your 100M port to speed 10 and duplex half. This will
then work better than auto sensing will.
-----Original Message-----
From: Roland Mok [mailto:[EMAIL PROTECTED]]
Sent: 20 October 2000 11:48
To: [EMAIL PROTECTED]
Subject: 10M and 100M Ethernet connection
Hi,
I 've a 10M ehternet port router and a 100M fast ethernet port router.
If I want to directly connect them with UTP cross cable, does it
auto-sense to work with 10M? Pls advise.
Sincerely,
Roland
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]