depending, some 100 MB are not 10/100 so it will not work at all ,
in those port you need to put a 100 MB hub or port switch
just check the specification of you card , 10/100 or 100 only
that's the question
Yves Routhier
Roland Mok wrote:
>
> Hi,
>
> I 've a 10M ehternet port router and a 100M fast ethernet port router.
> If I want to directly connect them with UTP cross cable, does it
> auto-sense to work with 10M? Pls advise.
>
> Sincerely,
> Roland
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
=====================================================RICIB=========
Yves Routhier
Connexim, Gestion de Reseaux
Telephone : 514-828-6141
Ligne Support : 888-828-6289 ||||||||
Telecopieur : 514-636-7467 | ~ ~ |
Courriel : [EMAIL PROTECTED] | O O |
================================================()()()======()()()=
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
