Tone Commander NT1U-220TC has two terminal connections. That *implies* that
you could use two devices simultaneously. I would suggest you dig up some
documentation to verify this before you run out and buy one though...
Good luck,
Jeff Odell
CCNP CCDA
-----Original Message-----
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Friday, October 20, 2000 2:39 PM
To: [EMAIL PROTECTED]
Subject: NT1 needed
Does anyone know of an NT1 model that will allow the connection of 2 S/T
interfaces (2 different routers) so that each can use a single chennel of
the single ISDN line connected to it (like a splitter).
Brian
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
