that's because the command "set system name" is for the SNMP variable and
not the prompt.
if you want to see that name as a prompt then use the command:
set prompt switch
will do it.
If you give the command "show system" you'll see what you're changing with
the "set system name" command.
Kevin Wigle
CCDP/CCNP................
----- Original Message -----
From: "Steven V. Snead" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, 21 October, 2000 18:47
Subject: CAT 5000 can't set system name
> I would appreciate someone out there that might know why my CAT 5000 won't
> let me change it's system name.
>
>
> Heres the steps I take at the console:
> AMMOCH11_Console (enable) set system name
> System name cleared.
> AMMOCH11_Console (enable) set system name switch
> System name set.
> AMMOCH11_Console (enable)
>
> I've quit came back in, but no change its like its locked with that name.
>
>
> Thanks,
>
> Steven V. Snead, MCSE, CCNA
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
