Go to the CCO
Phil
----- Original Message -----
From: "Aaron K. Dixon" <[EMAIL PROTECTED]>
To: "cslx" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, October 21, 2000 5:37 PM
Subject: RE: how to update my IOS for 2501?
> A 2500 runs from flash so when running in the normal operating mode you
> can't erase the flash. You can either boot the router in boot
mode(0x2101)
> and have full read/write capability or use the copy tftp flash option. It
> will prompt you to erase the flash just before it starts to copy the file.
>
>
> Regards,
> Aaron K. Dixon
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> cslx
> Sent: Saturday, October 21, 2000 7:50 AM
> To: [EMAIL PROTECTED]
> Subject: how to update my IOS for 2501?
>
>
> first,I use "copy run tftp & copy flash tftp" to backup
> and second ,I think I should erase my flash,and copy the new version IOS
> with "copy tftp flash" command,but I can't erase the flash,it tell me the
> flash is unwriteable?how can I do?
> and the name of the old IOS is "igs-in-l.110-4",but the name of the new
IOS
> is "igs-p-l.111-18.bin..bi" ,I want to know what 's the diffience of the
> names,is the new one for IPX only or IP only?please tell me more details
> about the name of the IOS file which is in FLASH
> thanx
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
