yup, check the console line line con 0 exec-timeout 0 0 Sam LI ----- Original Message ----- From: Pete <[EMAIL PROTECTED]> To: 'cslx' <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, October 24, 2000 8:09 AM Subject: RE: why? > Have your checked your timeouts? Email me if you need help. > > Sincerely, > Peter Kurdziel > CCNA, CCDA, MCSE, MCP+I > http://www.inotez.com > Cisco Q&A > http://www.inotez.com/discus > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > cslx > Sent: Sunday, October 22, 2000 4:48 AM > To: [EMAIL PROTECTED] > Subject: why? > > > I use the line to connect with the console of 2501 and the serial of the > pc,but no more 1 minute(even no more than 30 seconds),the Hyperterm lost > response,I have to re-run the hyperterm,why? > > > _________________________________ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _____NetZero Free Internet Access and Email______ > http://www.netzero.net/download/index.html > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
