try partition 1 8 8
it will fool the router that they have 2 flash both have 8M
Sam LI
----- Original Message -----
From: Tom Pruneau <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 15, 1980 9:07 AM
Subject: 2511 Flash Memory Question
> Greetings All
>
> I have a 2511 with 4 MB of flash in it. I need to upgrade the IOS needs
> 7MB. I tried canabalizing another 2511 I had and adding it's 4MB to the
1st
> routers 4MB making what I believed to be 8MB. But when I tried to tftp the
> new image over I still got an error saying not enough memory, and yes I
had
> opted to erase the flash first. When I went and looked at the flash the
> router saw it as two 4MB cards instead of 1 8MB.
>
> What do I need to do to get the flash blended together to act as 1 8MB?
>
>
> Thanks
>
> Tom
> Tom Pruneau
> Trainer Network Operations
> GENUITY
> 3 Van de Graff Drive Burlington Ma. 01803
> 24 Hr. Network Operations Center 800-436-8489
> If you need to get a hold of me my hours are 7AM-3PM ET Mon-Fri
>
> --------------------------------------------------------------------------
-
> This email is composed of 82% post consumer recycled data bits
> --------------------------------------------------------------------------
-
>
> "Once in a while you get shown the light
> in the strangest of places if you look at it right"
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
