Hi,
The 10Mbps interface does not support ISL. Either get a 2600 series or get
the two ethernet interface 2500 router.
Hope that help.
Thanks.
At 08:00 AM 10/24/2000 -0700, Adam Hickey wrote:
>The 2900 should do 10Mb/sec just fine.
>
>Adam Hickey
><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>Juan Blanco
>Sent: Tuesday, October 24, 2000 4:39 AM
>To: [EMAIL PROTECTED]
>Subject: ISL Trunk on a 2500
>
>Folks,
>
> I need help, I have 3 2500 router and 1 2900 switch, I want to be
> able to route between two vlans, I don't have a 100mb/s Ethernet
> interface on any of my routers.
>
>Questions:
>
> 1 There is a 100mb/s interface available for the 2500
>
> 2 If there is not a 100mb/s for the 2500 then there is a
> workaround to be able to do the same thing.
>
>
>Thanks in advance for your response.....
>
>
>Juan
>
Boo Kheng
Professional Services
Cisco Systems
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
