Hi There,
Does any one knows how to assign a loopback ip address to a serial
subinterface? Please look at the output of the show command below so that
you understand what I mean............ thanks.
Router>sh int s0/0.1
Serial0/0.1 is up, line protocol is up
Hardware is PQUICC with Fractional T1 CSU/DSU
Description: frame-relay PVC to Interlocken
Interface is unnumbered. Using address of Loopback99 (10.66.0.161)
MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY IETF
Router>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
