try using this command ip unumbered loopback 0 or 1
--- Lists Wizard <[EMAIL PROTECTED]> wrote:
> Hi There,
>
> Does any one knows how to assign a loopback ip
> address to a serial
> subinterface? Please look at the output of the show
> command below so that
> you understand what I mean............ thanks.
>
> Router>sh int s0/0.1
>
> Serial0/0.1 is up, line protocol is up
> Hardware is PQUICC with Fractional T1 CSU/DSU
> Description: frame-relay PVC to Interlocken
> Interface is unnumbered. Using address of
> Loopback99 (10.66.0.161)
> MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation FRAME-RELAY IETF
> Router>
>
>
>
_________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at
> http://mail.yahoo.com
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
