you can define a subinterface to be "multipoint" instead of "
point-to-point". then instead of
using "frame-relay interface-dlci x"
use multiple "frame-relay map" commands under that subinterface definition.
apply an IP address to the subinterface, and the IP addresses on the other
side of the PVCs must all be in the same subnet.
Mike Balistreri
">
>Thank you all for your help. I have one more question though :)
>Can you configure one subinterface to communicate with 2 different routers?
>
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
