On a Catalyst 5K the commands are as follows. I would hazzard a guess the
6501 is not much different.
set vtp domain <name>
!
set vtp mode <server|client|transparent>
!
set vtp password <password>
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, October 30, 2000 8:57 PM
Subject: Re: vlans & domain issue
> In a message dated 10/30/00 11:38:12 PM Eastern Standard Time,
> [EMAIL PROTECTED] writes:
>
>
> > I have a problem creating a vlan can some one help me. Here is the
output of
> > the command that I executed.
> >
> > Omer
> >
> > 6501> (enable) set vlan 2
> > Cannot add/modify VLANs on a VTP server without a domain name.
> > 6501> (enable)
> >
>
> You have to specify a domain name for your VLAN trunking protocol I
> believe...try:
>
> 6501> (enable) set VTP domain "name"
>
> There may be more to this but I believe this will set up your domain name.
> Somebody correct me if I'm wrong...
>
> Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP
> <A HREF="mailto: [EMAIL PROTECTED]">[EMAIL PROTECTED]</A>
>
> "Even if I knew I had only 1 more week to live, I would still
schedule
> my CCIE lab. I would just have to work a little harder I guess. After all,
> without any goals in life, I'm dead already."
> ~Mark
> Zabludovsky~
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
