It may be that you are using the wrong type of Emulation. Go to properties
and change it to Auto and also check for the defaults ASCII setup.
"CCIE TB" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I have a problem on a Cisco 2511 router. I use this router for lab
practice.
> When the router is booted and while connected via the console port of
> Windows 95, I get a screen full of squares!!!The baud rate is 9600. The
> Ctrl-break is not working. Is the problem from the Hyper Terminal software
> or from the router. The router was running well before. I was playing with
> the configuration register. The last setting I used was 0x2102. after that
I
> started getting this screen output.
> How can I get therouter to display a meaningful output?
> Is there a way to find out if the baud rate was changed?
>
> Your help is highly appreciated.
>
> Regards
>
> Adia
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
