On Tue, 7 Nov 2000, hifi hifi wrote:
> Dear all
>
> I want to establish a pair of DHCP to centralized allocate IP addresses to
> several AS5800 and AS5300.
>
> 1/ OSPF appoach
> I've tried OSPF to advertise connected IP from AS5800/5300 to outside
> network. However, the routing table exchange, due to async interface up /
> down, making the DR, BDR, AS5300 and AS5300 very busy.
use ospf but create a summary route, so that your more specifics ( /32's
etc ) don't cause your IGP to be flapping so much.
Brian
>
> 2/ NAT appoach
> NAT is not considered because it does not support ICQ.
>
> Do anyone know other better appoach to centralized allocate IP address? (No.
> of genuine IP is less than no. of async port)
>
>
> Regards
> HI fI
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]