Hi,
Does anyone have experience configuring the HP LanProbe III (RMON 1) with
Traffic director 8.1?
I had install the lanprobe with an IP and as an agent. When I test the
probe, it returns
the following string.
General info:
IP Address: 10.1.5.106
Ping: Not supported
Read Community: "public" OK
Write Community: "public" OK
SNMPv1 Protocol: Supported
Protocol Monitoring: Disabled or Not Supported
Application Monitoring: Disabled or Not Supported
High-Capacity Monitoring: Disabled or Not Supported
Application Response time: Disabled or Not Supported
Resource Monitoring: Disabled or Not Supported
Interface info:
Interface Number: 1
Description: HP LP-III Intel 82596
Interface type: ethernet csmacd (6)
Physical Address: xx-xx-xx-xx-xx-xx
Number of Interface: 2
Net Speed: 10 Mbit/sec
What I observe from this string is that I will not be able to perform
traffic monitoring
or even segment zoom into the lan probe because it says "Error Accessing
Agent Rmon-agent1(10M)! While
retrieving ETSTATS. Error: Entry or Group not present in Agent". The group
of agent and the agent itself
is configured properly. Even with the new HP LanProbe (RMON 2) doesn't help
either.
Please advice.
Thanks.
Ryan
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
