On Fri, 10 Nov 2000, Kevin Wigle wrote:
> Can't get to a router with a fe interface at the moment........
perhaps you can get to it from another interface, like a serial interface?
>
> Can a FE use sub-interfaces?
only if you are doing VLANS with ISL or dot1q.
>
> A problem we encountered is that we tried to bring up a new cct.
>
> The FE already had on OSPF area on it - say area 2
>
> We added a secondary address and put that network into area 3
>
> All hell broke loose.
>
> Can I add a sub-interface and put the ip address there with the new OSPF
> area?
to make a subint on an FE you must specify either "encapsulation isl" or
"encapsulation dot1q".
Brian
>
> Kevin Wigle
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
