Your config should look close to this one. Check it again and make sure you
have the cables in the correct ports.
ROUTER A
isdn switch-type basic-ni1
dialer-list 1 protocol ip permit
interface BRI0
ip address 192.168.1.2 255.255.255.0
encapsulation ppp
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
dialer map ip 192.168.1.1 broadcast 8358662
dialer load-threshold 1 either
dialer-group 1
ppp multilink
no shutdown
dialer-list 1 protocol ip permit
ROUTER B
isdn switch-type basic-ni1
dialer-list 1 protocol ip permit
Interface BRI0
ip address 192.168.1.1 255.255.255.0
encapsulation ppp
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
dialer map ip 192.168.1.2 broadcast 8358661
dialer load-threshold 1 either
dialer-group 1
ppp multilink
no shutdown
>From: "George Susini" <[EMAIL PROTECTED]>
>Reply-To: "George Susini" <[EMAIL PROTECTED]>
>To: "'Cisco'" <[EMAIL PROTECTED]>
>Subject: Teltone ISDN Demo config help
>Date: Thu, 9 Nov 2000 23:26:22 -0500
>
>Group,
>I am trying to configure the Teltone ISDN demonstrator, however when I
>connect the bri int to it and do a sh isdn stat I get the following:
>
>router1#sh isdn stat
>Global ISDN Switchtype = basic-ni
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 116, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 117, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI 116, ces = 1, state = 8(established)
> spid1 configured, spid1 sent, spid1 NOT valid
> TEI 117, ces = 2, state = 8(established)
> spid2 configured, spid2 sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>
>This config does not seem to be right since my spid's are not valid, I have
>double checked the spids and DN's. Any config tips on the switch ?
>
>Thanks in advance,
>George
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
