Ok, this is a follow up to my e-mail last night, as it would seem, the
problem was not with my route configuration, but rather with the MSFC
detcing a link failure. So here goes the next round of questions.
I have two 6509's configured for redundant connectivity. I am trying to get
the MSFC to detect a link failure at Layer2 so that the routing table will
be updated and packets can traverse the alternate path. The problem seems
to be that when all ports fail in a VLAN that the VLAN is still considered
up.
Is there any way to get the MSFC to view a port on the catalyst as a single
interface and detect a failure on that link? If not, how can I have layer 3
redundancy in the event of a link/module failure?
Any help appreciated
-- Kevin
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
