Please post your config on the 2924 and the 5500.
Autonegotiation on all these ports or did you set it to 100 on all 8 ports?
"Richard Dukes" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I need input or comment. I have two 2924xl switches and 5500 switches on
my network. I have a cross over cable connecting the two switches together
which will give me 40 ports to work with. The problem that Im running into
is that I FEC Port 21 to 24 to 4 port on the 5500 using the same port group
trying to communicate at 100mbp not 10mbs. I can communicate at 10mbps Half
duplex but unable to communicate at 100mbp full duplex any comment anyone.
Send reply to [EMAIL PROTECTED]thank in advance
>
>
> Join 18 million Eudora users by signing up for a free Eudora Web-Mail
account at http://www.eudoramail.com
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
