I have a question regarding lock and key. If I configure my vty's for
"autocommand access-enable host", then how can I telnet to my router? I
mean, from then on out it will just log you out after logging in (and
"set" the dynamic access-list). What if I have a router with s0 (wan
side/internet) and e0 (lan side), and I want to be able to telnet to the
router, to configure it from the lan side, and I want users to be able to
telnet to the router from the wan side to set lock and key...........is
this even possible?
>From what I am seeing, is that once lock and key is in effect on vty's,
you:
1. have to have an input access list on the interface you enter the router
on (else it complains)
2. are immediatly logged out, and the dynamic access-list set, and their
is no way to get "into" the router via vty.
Brian
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
