EBGP multihop has nothing to do with load balancing.
As for using BGP to control incoming traffic from your ISP, I would say
there is no simple answer here. You will need to do a lot of reading and
thinking.
Basssam Halabi, Internet Routing Architectures, is a good place to start.
www.nanog.org is another.
Best wishes
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Andy
Sent: Tuesday, November 14, 2000 7:26 PM
To: [EMAIL PROTECTED]
Subject: BGP load balancing
Hi all,
I want to know that does command ebgp-multihop provide load balancing over
ATM for a router, also how can I configure ebgp to control incoming traffic
from my ISP
Regards
Andy
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
