ISDN Gurus,

I have a remote branch that connects to the Central office using ISDN.  Due
to the FRUGALITY of my company they are not planning on boosting up the
link.  The branch has grown from 18 users to 40 and they have started to
complain about internet access speed, File sharing on the PDC and connection
to our Exchange server(Opening attachements are slow).

I think I have configured the router correctly to maximize the link between
us. See below:
********************
interface BRI0
 description Link to Timbuktu
 no ip address
 no ip directed-broadcast
 encapsulation ppp
 dialer rotary-group 0
 isdn switch-type basic-ni
 isdn spid1 #####
 isdn spid2 #####
 no fair-queue
 no cdp enable
!
interface Dialer0
 description connected to Timbuktu
 ip address 10.79.1.5 255.255.255.252
no ip directed-broadcast
 encapsulation ppp
 dialer in-band
 dialer idle-timeout 300
 dialer map ip 10.79.1.6 name TIMGW broadcast ########
 dialer map ip 10.79.1.6 name TIMGW broadcast ########
 dialer hold-queue 10
 dialer load-threshold 1 either
 dialer-group 1
 no fair-queue
 no cdp enable
 ppp authentication chap
 ppp multilink
**********************************
Can anyone tell me if there are any other modification that I might be able
to add to fully utilize this link ?

Secondly, I have tried to look at traffic that is coming accross and I am
not clear on how to interpret what I see in sh int bri , sh isdn status,
debug dialer.  I can see that the second line is coming up but I need to
know if the lines are maxed out or not so that I can present it to the "BIG
CHEESE" so that we can get higher bandwidth. Is there a link on cisco that
anyone can point me to to translate those codes ?


Thanks in advanced.


Manolito Liwanag 
IT&T Department
DRAKE INTERNATIONAL

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to