ISDN Gurus,
I have a remote branch that connects to the Central office using ISDN. Due
to the FRUGALITY of my company they are not planning on boosting up the
link. The branch has grown from 18 users to 40 and they have started to
complain about internet access speed, File sharing on the PDC and connection
to our Exchange server(Opening attachements are slow).
I think I have configured the router correctly to maximize the link between
us. See below:
********************
interface BRI0
description Link to Timbuktu
no ip address
no ip directed-broadcast
encapsulation ppp
dialer rotary-group 0
isdn switch-type basic-ni
isdn spid1 #####
isdn spid2 #####
no fair-queue
no cdp enable
!
interface Dialer0
description connected to Timbuktu
ip address 10.79.1.5 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 300
dialer map ip 10.79.1.6 name TIMGW broadcast ########
dialer map ip 10.79.1.6 name TIMGW broadcast ########
dialer hold-queue 10
dialer load-threshold 1 either
dialer-group 1
no fair-queue
no cdp enable
ppp authentication chap
ppp multilink
**********************************
Can anyone tell me if there are any other modification that I might be able
to add to fully utilize this link ?
Secondly, I have tried to look at traffic that is coming accross and I am
not clear on how to interpret what I see in sh int bri , sh isdn status,
debug dialer. I can see that the second line is coming up but I need to
know if the lines are maxed out or not so that I can present it to the "BIG
CHEESE" so that we can get higher bandwidth. Is there a link on cisco that
anyone can point me to to translate those codes ?
Thanks in advanced.
Manolito Liwanag
IT&T Department
DRAKE INTERNATIONAL
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
