I configured static ip route but i will not appear in the ip routing table.
Below is the output of some commands.
Can some one explain this?
Thanks
Lists Wizard
############################################################
Router-12(config)#ip route 10.0.0.0 255.0.0.0 179.70.32.13
Router-12(config)#^Z
Router-12#
%SYS-5-CONFIG_I: Configured from console by console
Router-12#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is not set
170.70.0.0/24 is subnetted, 2 subnets
C 170.70.32.0 is directly connected, Ethernet0/1
C 170.70.21.0 is directly connected, Ethernet0/0
Router-12#sh ip route st
Router-12#
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
