ooops sorry i did not read the the full email i missed the bottom of email
displaying the config :)
Regards,
Jason Baker
Network Engineer
MCSE, CCNA
-----Original Message-----
From: Jason Baker [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 2:50 PM
To: 'Chuck Larrieu'; Lists Wizard; 'Cisco group study'
Subject: RE: Static route does not appear in routing table
how about creating an access list..
then adding this access list to a route map.
Regards,
Jason Baker
Network Engineer
MCSE, CCNA
-----Original Message-----
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 1:59 PM
To: Lists Wizard; 'Cisco group study'
Subject: RE: Static route does not appear in routing table
If I were to guess I would say it is because there is no 179.70.32.13
network
Your directly connected networks are 170.something. there are no other
routes known to the router. Therefore it says "I got no idea where this
destination address is so I won't bother with it" :->
Or something like that.
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Lists Wizard
Sent: Tuesday, November 14, 2000 7:14 PM
To: [EMAIL PROTECTED]; 'Cisco group study';
[EMAIL PROTECTED]
Subject: Static route does not appear in routing table
I configured static ip route but i will not appear in the ip routing table.
Below is the output of some commands.
Can some one explain this?
Thanks
Lists Wizard
############################################################
Router-12(config)#ip route 10.0.0.0 255.0.0.0 179.70.32.13
Router-12(config)#^Z
Router-12#
%SYS-5-CONFIG_I: Configured from console by console
Router-12#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is not set
170.70.0.0/24 is subnetted, 2 subnets
C 170.70.32.0 is directly connected, Ethernet0/1
C 170.70.21.0 is directly connected, Ethernet0/0
Router-12#sh ip route st
Router-12#
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
