I have a Frame Relay connection between to locations. One location is
subnetted 10.4.0.0/27 10.4.0.32/27 10.4.0.64/27 10.4.0.96/27 10.4.0.128/27
and 10.4.0.160/27. My WAN Link is 10.252.0.0/30 the network at the other
end of the WAN Link is 10.1.1.0/24.
I'm having some problems getting EIGRP to summarize this. Is it due to the
fact that it only summarizes when crossing a classful network boundry? For
example if my WAN link was 192.168.10.0/30.
I also noticed on my 3600 series routers I have an option for EIGRP wild
card mask bits under the network command while at the config-router# prompt.
I do not have this option on my 2600 series routers, both are running
12.0(5) IOS.
Thanks,
Clayton Price
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
