Do you have a Unix box you can host NTP from? Might try that as a source.
Also, if this box is losing time, don't set it as an ntp master (it
shouldn't be serving out bogus time). Oh, think I may have found your
problem, try assigning a stratum to your master:
ntp master 15
I'd set 15 as it's the lowest (especially since you have no true contact
with an accurate source), and hopefully that'll let you get time to your
misbehaving box. I tested a bit on some routers I have, and whenever I set
bogus times, checked that it did get set bogus, and rebooted, they always
got the right time when they came back up from the ntp master they were
configured to poll.
--
Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Rossetti, Stan"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> We have a problem on our netowork where the router lose their clock
settings
> when the router reboots. The network is a closed network and does not
have
> any outside sources like an ntp server. Is there anyway to maintian the
> clock even when the router is rebooted. I have tried setting the clock
and
> calendar and then using the "ntp master" and "ntp peer" commands, but the
> peer routers clock does not update when I change the master router clock.
> Is there something that I m missing here. I also tried using the clock
> calendar- valid, but could not get the peer router to update it's clock
when
> I changed the master clock source. How does the clock calendar-valid
> configuration work. I mean do I need to apply this command to all routers
> in the network?
>
> Thanks,
>
> Stan Rossetti
>
>
> Russia Services Group
> Email: [EMAIL PROTECTED]
> Phone: (256) 544-5031
> Beeper: 544-1183 pin # 0112
>
> <<...>>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
