assuming the external router is in the same vtp domain as the switch(es),
answer is 5.
you enable mls first globally then on the interface.
hth,
mark.
Sisqo <[EMAIL PROTECTED]> wrote in message
news:<8va19a$8fo$[EMAIL PROTECTED]>...
>18. Entering the mls rp ip command on an interface before assigning that
>interface to a VTP domain.
> 1.. prohibits the interface from interacting with any switches.
> 2.. prohibits that interface from becoming the management interface.
> 3.. forces the adminstrator to manually assign the VLAN ID to that
>interface.
> 4.. restricts the interface to communicating with its directly connected
>switch only.
> 5.. automatically places the interface in the default VTP domain as the
>directly connected switch.
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
