The router does not cache the web pages, the cache engine caches the web
pages. The router is told to redirect all outbound HTTP packets to the
cache server. Then the cache engine takes over. Either returning a
previously cached copy of the requested page or fetching the page and
storing it for future requests.
Minh,
the command to start the wccp process is: "ip wccp enable". I run it on a
3640 router with IP Enterprise 11.2 code. I'm not certain if wccp is
available on those lower end systems. I tried a quick search through my
cache engine manual, but found no reference to minimum router config.
- Jon
-----Original Message-----
From: Lowell Sharrah [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 21, 2000 2:32 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Router with Web Cache Engine
why would you want a router to cache web pages/addresses? a router is made
to route packets.
>>> "Minh Vu" <[EMAIL PROTECTED]> 11/21/00 12:24PM >>>
I tried on 2501 vesion 12.1 Enterprise and 1005 version 11.3aT1 Enterprise,
they both still don't have that command. (ip wccp)
I also do "sh ip wccp" or "sh ip wccp web-caches" and got reply with invalid
input:
HST2501#sh ip wccp
^
% Invalid input detected at '^' marker.
HST2501#
Any ???
----- Original Message -----
From: "Steve Smith" <[EMAIL PROTECTED]>
To: "Minh Vu" <[EMAIL PROTECTED]>
Sent: Tuesday, November 21, 2000 9:04 AM
Subject: RE: Router with Web Cache Engine
* Cisco IOS Release 11.1(14)CA, and the 7500 and 7200 series
routers
* Cisco IOS Release 11.2 (10)P, and the 2500, 36xx, 4x00, RSP7000,
7200, and 7500 series routers, and the router blade for the Catalyst
5000
Usually Enterprise. I run Enterprise and I have the ability.
* -----Original Message-----
From: Minh Vu [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 21, 2000 10:09 AM
To: [EMAIL PROTECTED]
Subject: Router with Web Cache Engine
Hi,
Anyone know which IOS (ie: IP, Enterprise, FW, etc...) support the Web
Cache Engine ? I tried to find the command on my router but I couldn't
find it on Cisco 1005 and 2501 with Enterprise feature set.
I did went thru cisco document site.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1
5/wc1pre.htm
<http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver
15/wc1pre.htm>
and here
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1
5/wc1inst.htm#16914
<http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver
15/wc1inst.htm#16914>
they said type in command in global configuration mode: ip wccp
but when I tried on those two routers it was unknown command.
Anyone have any hint?
Thanks
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
