the wccp is a command on the router that would route it to a "web cache
engine" which is a caching server. So instead of getting a layer 4 switch,
this feature allows a router to look into http requests and forwards it to
the cache server.

"Lowell Sharrah" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> why would you want a router to cache web pages/addresses?  a router is
made to route packets.
>
> >>> "Minh Vu" <[EMAIL PROTECTED]> 11/21/00 12:24PM >>>
> I tried on 2501 vesion 12.1 Enterprise and 1005 version 11.3aT1
Enterprise,
> they both still don't have that command. (ip wccp)
>
> I also do "sh ip wccp" or "sh ip wccp web-caches" and got reply with
invalid
> input:
>
> HST2501#sh ip wccp
>                          ^
> % Invalid input detected at '^' marker.
>
> HST2501#
>
>
> Any ???
>
>
> ----- Original Message -----
> From: "Steve Smith" <[EMAIL PROTECTED]>
> To: "Minh Vu" <[EMAIL PROTECTED]>
> Sent: Tuesday, November 21, 2000 9:04 AM
> Subject: RE: Router with Web Cache Engine
>
>
> * Cisco IOS Release 11.1(14)CA, and the 7500 and 7200 series
> routers
>
>
> * Cisco IOS Release 11.2 (10)P, and the 2500, 36xx, 4x00, RSP7000,
> 7200, and 7500 series routers, and the router blade for the Catalyst
> 5000
>  Usually Enterprise. I run Enterprise and I have the ability.
> * -----Original Message-----
> From: Minh Vu [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, November 21, 2000 10:09 AM
> To: [EMAIL PROTECTED]
> Subject: Router with Web Cache Engine
>
>
>
> Hi,
>
> Anyone know which IOS (ie: IP, Enterprise, FW, etc...) support the Web
> Cache Engine ? I tried to find the command on my router but I couldn't
> find it on Cisco 1005 and 2501 with Enterprise feature set.
> I did went thru cisco document site.
> http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1
> 5/wc1pre.htm
> <http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver
> 15/wc1pre.htm>
> and here
> http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver1
> 5/wc1inst.htm#16914
> <http://www.cisco.com/univercd/cc/td/doc/product/iaabu/webcache/ce15/ver
> 15/wc1inst.htm#16914>
>
> they said type in command in global configuration mode: ip wccp
> but when I tried on those two routers it was unknown command.
>
> Anyone have any hint?
>
> Thanks
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to