TACACS should usually be setup so that if TACACS is unavailable to the
device that the local password can be used. If you do not know the local
info then you will need to do a break as the router boots to get into rommon
and set the configuration register so the router does not load the startup
config. I believe the register can be set to 0x0040 to get the router to
ingnore the start config.
----- Original Message -----
From: "Nabil Fares" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 22, 2000 9:44 AM
Subject: 7010 with TACACS
> Greetings all,
>
> I've a 7010 router that was configured with TACACS. I need to reconfigure
> this router, its no longer connected to the network thou. So, tacacs can
> not authentic to allow me in. Is there a way to bypass tacacs
> authentication?
>
> Thanks,
>
> Nabil
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
