Hi
If it was configured properly, then you should see the following sequence:
username prompt
password prompt
password prompt
In the Second password prompt, enter the enable secret password and it
should let you in. If this is not the case, than simply do a password
recovery on the router?
http://www.cisco.com/warp/public/474/index.shtml
Regards
Geoffrey
----- Original Message -----
From: "Nabil Fares" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 22, 2000 3:44 PM
Subject: 7010 with TACACS
> Greetings all,
>
> I've a 7010 router that was configured with TACACS. I need to reconfigure
> this router, its no longer connected to the network thou. So, tacacs can
> not authentic to allow me in. Is there a way to bypass tacacs
> authentication?
>
> Thanks,
>
> Nabil
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
