We also need to know what processord you will use the 100 , 200 or 300.
What interfaces. The problem lies on the processing power needed to do this. If you
split
the GRE on multiple Interfaces all running CEF there will be less load on the processor
and therefore more tunnels will you be able to have. What else will you be running on
this
box ACL's and other commands utilize alot of processor. What type of cost are you
looking
at also do you want a 7200 or is the 3600 the max you are willing to pay for a router?
Brian wrote:
> On Wed, 22 Nov 2000, Liu Jianxin-qch1927 wrote:
>
> >
> > Hi,
> >
> > I have a question:
> >
> > if i want to set up GRE tunnels between 30 sites, what kind of router should i use?
> >
>
> We need more info. Will each tunnel be on a seperate physical
> interface? how many physical interfaces do you need? what interface
> types? What is going over these tunnels? How much utilization do you
> expect the GRE's to have?
>
> Brian
>
> > site1 --------------Internet -----------------site2
> > | .....
> > site3 ......
> >
> > Thanks,
> >
> > Jianxin
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> -----------------------------------------------
> Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
> Network Administrator
> ShreveNet Inc. (ASN 11881)
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
