OK,
more detail,
We need 30 tunnels on a single phisical interface, this interface maybe serial port
which connect to Internet.
I hope all these tunnels begin at the serial interface of site1 router, and end at
others serail interface which connect to Internet too.
The GRE traffic is not too much, about 10% of the total traffic on the interface,
other 90% traffic is normal Internet traffic.
The main purpose is to allow the users in site1 to access Intranet servers in other
sites.
-----Original Message-----
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 22, 2000 2:54 PM
To: Liu Jianxin-qch1927
Cc: [EMAIL PROTECTED]
Subject: Re: How much GRE tunnel can supported on Cisco routers
On Wed, 22 Nov 2000, Liu Jianxin-qch1927 wrote:
>
> Hi,
>
> I have a question:
>
> if i want to set up GRE tunnels between 30 sites, what kind of router should i use?
>
We need more info. Will each tunnel be on a seperate physical
interface? how many physical interfaces do you need? what interface
types? What is going over these tunnels? How much utilization do you
expect the GRE's to have?
Brian
> site1 --------------Internet -----------------site2
> | .....
> site3 ......
>
> Thanks,
>
> Jianxin
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
