On Wed, 22 Nov 2000, Jeff Duchin wrote:
> What's up guys and gals..... I'm upgrading the memory in 2 2501'a and one of
> them is not registering the new memory.... I've tried 8 and 16mb 72 pin
> sims.
are they parity? if so, be careful on what memory you use. not all off
the shelf parity simms will work........the cisco is finicky, you should
use cisco approved or third party memory known to work.
Brian
>
> see below:
>
> cisco 2500 (68030) processor (revision A) with 1024K/1024K bytes of memory.
> Processor board serial number 01289263
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> Bridging software.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> Authorized for Enterprise software set. (0x0)
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of flash memory sized on embedded flash.
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
