Try single-sided 4MB or 16MB parity memory. I don't think the 2500s like
double-sided memory.
Paul
"Jeff Duchin" wrote in message <8vh0e0$sd4$[EMAIL PROTECTED]>...
>What's up guys and gals..... I'm upgrading the memory in 2 2501'a and one
of
>them is not registering the new memory.... I've tried 8 and 16mb 72 pin
>sims.
>
>see below:
>
>cisco 2500 (68030) processor (revision A) with 1024K/1024K bytes of memory.
>Processor board serial number 01289263
>X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
>Bridging software.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>Authorized for Enterprise software set. (0x0)
>1 Ethernet/IEEE 802.3 interface.
>2 Serial network interfaces.
>32K bytes of non-volatile configuration memory.
>8192K bytes of flash memory sized on embedded flash.
>
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
