I never seen anything like this when router reboots
itself
when you enter "Show ISDN active" command.
I tried this 5 times and it brings
fist line of info
than kicks me out of telnet and no longer
pingable.
What does BUS error mean ?? Is there hardware
problem with router ?
Thanks
everyone.
Inamul
Cisco Internetwork Operating System
Software
IOS (tm) 1000 Software (C1000-Y-M), Version 11.2(14), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Mon
18-May-98 12:02 by tlane
Image text-base: 0x02004000, data-base:
0x0229BF4C
ROM: System Bootstrap, Version 5.3.2(5) [nitin 5], RELEASE
SOFTWARE (fc1)
BOOTFLASH: 1000 Bootstrap Software (C1000-RBOOT-R), Version
10.3(5), RELEASE SOF
TWARE (fc1)
System restarted
by bus error at PC 0x229AF2A, address 0xBADADD0
System image file is
"flash:112-14.bin", booted via flash
cisco 1000 (68360)
processor (revision D) with 7680K/512K bytes of memory.
Processor board ID
02055880
Bridging software.
X.25 software, Version 2.0, NET2, BFE and
GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE
802.3 interface(s)
1 ISDN Basic Rate interface(s)
Integrated NT1 for ISDN
Basic Rate interface
8K bytes of non-volatile configuration memory.
4096K
bytes of processor board PCMCIA flash (Read/Write)
Configuration register
is 0x2102
