RE: SHOW ISDN ACTIVE REBOOTS ROUTER

[Brant Stevens]

Title:

Swap that sucker out...  :)

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Desai, Inamul
Sent: Wednesday, November 22, 2000 5:39 PM
To: [EMAIL PROTECTED]
Subject: SHOW ISDN ACTIVE REBOOTS ROUTER

I never seen anything like this when router reboots
itself when you enter "Show ISDN active" command.
I tried this 5 times and it brings fist line of info
than kicks me out of telnet and no longer pingable.

What does BUS error mean ?? Is there hardware

problem with router ?

Thanks everyone.

Inamul


Cisco Internetwork Operating System Software
IOS (tm) 1000 Software (C1000-Y-M), Version 11.2(14), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Mon 18-May-98 12:02 by tlane
Image text-base: 0x02004000, data-base: 0x0229BF4C

ROM: System Bootstrap, Version 5.3.2(5) [nitin 5], RELEASE SOFTWARE (fc1)
BOOTFLASH: 1000 Bootstrap Software (C1000-RBOOT-R), Version 10.3(5), RELEASE SOF
TWARE (fc1)

System restarted by bus error at PC 0x229AF2A, address 0xBADADD0
System image file is "flash:112-14.bin", booted via flash

cisco 1000 (68360) processor (revision D) with 7680K/512K bytes of memory.
Processor board ID 02055880
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
Integrated NT1 for ISDN Basic Rate interface
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)

Configuration register is 0x2102