On Sun, 26 Nov 2000, Han Nguyen wrote:
> Can someone please tell me how do I know what version of FW and SW on the
> Cat2901 will support Cat 5000 IOS (cmd set)?
cat2901's use the same software as a cat5000........whatever version you
are running, is the same version, same code, same commands, as a cat5k.
Console> (enable) sh module
Mod Module-Name Ports Module-Type Model Serial-Num Status
--- ------------------- ----- --------------------- --------- --------- -------
1 2 100BaseTX Supervisor WS-X2900 003605924 ok
2 12 10/100BaseTX Ethernet WS-X2901 003976417 ok
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-60-5c-2c-a6-00 to 00-60-5c-2c-a9-ff 1.8 2.1 4.5(9)
2 00-60-5c-21-5d-28 to 00-60-5c-21-5d-33 1.0 1.4 4.5(9)
Cat2901 is a Supervisor I. Cat 2926T is a Supervisor II.
>
> Thanks.
>
> Han.
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
