Hi all,
I just purchased a Cat 2900XL for my CCNP lab and am having some problems
with it. I configured a VLAN, let's call it VLAN 60. I assigned some ports
to VLAN 60.
I did a no shutdown on int vlan 60 and when I do a show int it still shows
it as admin down. I check the config and it does show the interface
shutdown. I go ahead and
do a no shutdown again, write the config, and still the same thing. VLAN 1
is working fine, its basically any other VLAN that I add is admin down. I
have erased all files in flash along with IOS and installed the latest IOS
from CCO and it is still doing the same thing. Am I missing something?
Please help this is driving me up the walls...
Thanks!!!
Eddie
----------
Edward J. Gomez, MCSE, CNE, CCNA
Information Systems Manager
ProxyMed, Inc
2555 Davie Road,
Suite 110
Fort Lauderdale, Florida 33317
(954) 473-1001 x315
http://www.proxymed.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
